642-980 Questions and Answers required to pass the certification exam at first attempt.
Its a very useful platform for working professionals like us to practice the question bank anywhere. I am very much thankful to you people for creating such a wonderful practice questions which was very useful to me in the last days of examinations. I have secured 88% marks in 642-980 Exam and the revision practice tests helped me a lot. My suggestion is that please develop an android app so that people like us can practice the tests while travelling also.
Found an accurate source for real 642-980 Actual Questions.
Hey friends! Gotta pass the 642-980 exam and no time for studies? Dont worry. I can solve yr problem in case u believe me. I had similar situation as time was short. Text books didnt help. So, I looked for an easy soln and got one with the Killexams. Their question & answer worked so well for me. Helped clear the concepts and mug the difficult ones. Found all questions same as the guide and scored well. Very helpful stuff, Killexams.
Did you tried this great source of Latest Braindumps.
The 642-980 exam is supposed to be a very diffcult exam to clear But I cleared it last week in my first attempt. The Killexams Q&As guided me well and I was well prepared. Advice to other students - dont take this exam lightly and study very well.
Try out these real 642-980 questions.
Have passed 642-980 exam with Killexams questions answers. Killexams is 100% reliable, most of the questions were the same as what I got on the exam. I missed a few questions just because I went blank and didnt remember the answer given in the set, but since I got the rest right, I passed with good scores. So my advice is to learn everything you get in your preparation pack from Killexams, this is all you need to pass 642-980.
Worked hard on 642-980 books, but everything was in the Q&A.
I chose Killexams because I didnt simply want to pass 642-980 exam but I wanted to pass with good marks so that I would make a good impression on everyone. In order to accomplish this I needed outside aid and this Killexams was willing to provide it to me. I studied over here and used 642-980 questions to prepare. I got the grand prize of best scores in the 642-980 test.
I need real questions of 642-980 exam.
In order to study and prepare for my 642-980 test, I used Killexams QA and exam simulator. All thanks to this incredibly astounding Killexams. Thank you for assisting me in clearing my 642-980 test.
Believe it or not, Just try once!
A portion of the lessons are exceptionally intricate yet I comprehend them utilizing the Killexams Q&A and Exam Simulator and solved all questions. Essentially on account of it; I breezed through the test horribly basically. Your 642-980 dumps Product are unmatchable in quality and correctness. All the inquiries in your item were inside the test as well. I used to be flabbergasted to envision the exactness of your material. Much obliged once more for your assistance and all the help that you provided to me.
Got no problem! 3 days preparation of 642-980 real questions is required.
I took this exam last month and passed it thanks to my preparation with the Killexams kit. This is a great exam dump, more reliable than I could expect. All questions are valid, and it also includes plenty of preparation info. Better and more reliable than I expected - I passed with over 97%, which is the best 642-980 exam score. I dont know why so few IT people know about Killexams, or maybe its just my conservative environment? Anyways, I will be spreading the word among my friends since this is great and will be helpful to many.
Where can I download 642-980 dumps?
This is an absolutely valid and reliable resource, with real 642-980 questions and correct answers. The testing engine works very smooth. With additional info and good customer support, this is an incredibly good offer. No free random braindumps available online can compare with the quality and the good experience I had with Killexams. I passed with a really high score, so Im telling this based on my personal experience.
Exam questions are changed, where can i find new questions and answers?
My planning for the exam 642-980 was unsuitable and subjects seemed troublesome for me as well. As a snappy reference, I depended on the Q/A by Killexams and it conveyed what I needed. Much oblige to the Killexams for the assistance. To the point noting technique of this aide was not difficult to catch for me as well. I simply retained all that I could. A score of 92% was agreeable, contrasting with my 1-week battle.
Which two statements are true about the OTV otvsite-identifier id command? (Choose two.)
It is used to determine if there are other OTV edge devices on the local site.
It is used to identify the site to other OTV sites in the network.
It should be configured in addition to the otv site-vlan command.
It should be configured instead of the otv site-vlan command.
The value should be the same across all OTV sites.
Answer: A, C
Refer to the exhibit.
A customer is having a problem with NPV. Which of these is the cause of the problem?
No server was requested or received by the FLOGI database.
One external link must be up for server interface to be up.
Multiple external links must be up for the server to come up.
Internal links are down and must be up for the server interface to be up.
Refer to the exhibit. Which two options are causes of the error when setting up VM-FEX on the Cisco UCSB-Series Blades? (Choosetwo.)
Dynamic vNICs are not supported on the version the admin is running.
The network adapter in the blade does not support dynamic vNICs.
Too many dynamic vNICs are configured.
Dynamic vNICs are not required for VM-FEX.
The dynamic vNIC connection policy was never applied to the service profile.
Answer: B, C
When using a Cisco Nexus 5500 and Cisco Nexus 7000 Series Switch, how can a port channel interface be configured?
Layer 3 interface
Layer 3 interface in non-admin VDC only
Layer 3 interface in admin VDC only
Layer 3 interface in VDC 1 only
OTV is configured–testpings confirm that it is working butother tests do not seem to perform well. What is the problem?
VLANs are not properly extended.
The multicast groups are not defined properly.
The transport network is not configured to process the overhead that is introduced by OTV.
The overlay may not be enabled.
Refer to the exhibit.
Which conditions can trigger on a Cisco Nexus device runningFabricPath?
A switch connected to the Cisco Nexus device is running RSTP instead of STP.
A BPDU with bridge priority set to 61140 is received by the switch edge port.
The switch edge port in the STP domain is not configured as root.
VLAN is configured incorrectly on port-channel 100.
On the secondary vPC switch, under which circumstance does the vPC autorecovery feature not bring up the vPC member ports?
Peer link fails, and subsequently, the peer-keepalive link fails.
Peer link is up, and the peer-keepalive link fails.
Both vPC peers are reloaded, and the primary does not come back up.
Peer link fails, and subsequently, the primary switch fails.
On the Cisco Nexus 7000 Series Switch, what could bethe reason why the (config- vlan)#private-vlan primary command fails?
There are not enough resources in the VDC.
You are using a reserved VLAN ID.
The VLAN is a secondary VLAN.
The interface is in the wrong VRF.
The PVLAN feature is not enabled.
The VLAN does not exist.
A customer reports that a 10-Gb interface between a Cisco Nexus 7009 Switch and a Cisco Nexus 5548UP Switch is not passing traffic. The Nexus 7009 interface indicates up/up. The Nexus 5548UP interface indicates up/down. Which feature should you enable to help isolate the root cause?
Which two describe the correct requirements for non-disruptive IOS ISSU on Cisco Nexus 7000 Series Switches? (Choose two.)
updated kickstart and system images must be staged in bootflash on single-supervisor switches
updated kickstart and system images must be staged in bootflash on dual-supervisor switches
low version skew
Answer: C, D
Which statement is true regarding how OTV edge devices will react based on the configuration of the VLANs being extended across the overlay network?
Any VLANs not extended will not be populated in the local OTV route table.
Only the same-site edge AED device controls which VLANs are to be extended.
Any extended VLANs will not be populated in the remote OTV route table.
By default, all VLANs on an edge device will be extended.
Refer to the exhibit.
An administrator is trying to configure a port channel on a Cisco Nexus 7000 Series Switch, which is connected to a Cisco Nexus 5500 Series Switch. The port channel will not come up, so theadministrator executes the show port-channel summary command on the Cisco Nexus 7000 SeriesSwitch and displays the output. What are two causes of the error? (Choose two.)
The Cisco Nexus 7000 Series Switch needs to be configured with no lacp suspend- individual.
The Cisco Nexus 5500 Series Switch is configured with channel-group mode on.
The LACP feature has not been enabled on the Cisco Nexus 7000 Series Switch.
The ports are cabled to the wrong switch.
The port channel load-balancing algorithm does not match.
Answer: B, D
Refer to the exhibit.
A customer is having difficulty getting NPV working. What is the cause of the problem?
The core NPV device is not enabled.
The core NPV device is not a switch.
The core NPV device is not configured on both ends.
The core NPV device is not configured on the upstream port.
A customer is troubleshooting FCoE in its network. They have discovered that vFC is currently down and there is no active STP port state on the bound Ethernet interface. What should the STP port state be to correct this issue?
The bound interface should be in an STP forwarding state for the native VLAN only.
The bound interface should be in an STP learning state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.
The bound interface should be in an STP forwarding state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.
The bound interface should be in an STP blocking state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.
Which configuration is needed to suppress duplicate IP addresses when HSRP localization is enabled?
Configure matching passwords in each data center.
Configure no ip arp gratuitous hsrp duplicate under the VLAN.
Remove the passwords in each data center.
Configure mismatching HSRP versions between data centers.
Change one data center to run VRRP rather than HSRP.
Cisco 642-980 Exam (Troubleshooting Cisco Data Center Unified Fabric) Detailed Information
642-980 - Troubleshooting Cisco Data Center Unified Fabric